| Global Current Level |
4 |
| Current Levels for Color-Mixing |
0 |
| Channel |
16 |
| Current Levels for Dimming |
256 |
| Charging Indicator |
NO |
| Control Interface |
IIC |
| Power Supply (Max) (V) |
5.5 |
| Global Max Current(mA) |
37 |
| IO Level (V) |
1.8 |
| Audio Sync. |
NO |
| Power Supply (Min) (V) |
2.5 |
| Auto Breath |
NO |
| Temperature |
-40℃~105℃ |
| Topology |
Linear |
| Package (mm) |
QFN 4X4-24L |
16 multi-function I/O, each for LED drive (current-source dimming) or GPIO mode
256 steps linear dimming in LED drive mode
Any GPIO can be configured as an input or an output independently
Support interrupt, 8μs deglitch, low-level active
Standard I2C interface, AD1/AD0 select I2C device address
SDA, SCL, RSTN, and all GPIO can accept in 1.8V logic input
Supply shutdown function, low-level active
2.5V~5.5V power supply
QFN 4mm×4mm-24L package
AW9523Q is a 16 multi-function LED driver and GPIO controller. Any of the 16 I/O ports can be configured as LED drive mode or GPIO mode. Furthermore, any GPIO can be configured as an input or an output independently.
After power on, all the 16 I/O ports are configured as GPIO output as default, which default states are set according to the I2C device address selection inputs, AD0 and AD1. All I/O ports configured as inputs are continuously monitored for state changes. State changes are indicated by the INTN output. When AW9523Q reads GPIO state through the I2C interface, the interrupt is cleared. Interrupt has 8μs deglitch.
When the I/O ports are configured as LED drive mode, AW9523Q can set the current of LED drive between 0~IMAX by I2C interface, which is divided by 256 steps linear dimming. The default maximum current (IMAX) is 37mA, and IMAX can be changed in GCR register.
AW9523Q is available in QFN 4mm×4mm-24L package, and 2.5V~5.5V power supply.
